How to log into Aztec Router? Troubleshooting

How to Log into any Router?

Assume your Aztech router IP address is 192.168.1.1  and you want to configure your Aztech router settings using the control panel.

Follow simple steps to Login into your Aztech router to access your router control panel using 192.168.1.1 as your router’s IP Address.

Aztech router IP address is the default gateway which we use to connect with the whole digital world using your web browser.

Enter the IP Address into URL of the browser

First, you need to enter your Aztech router IP address into your device browser address bar (URL). If your Aztech router IP address is correct, you will direct toward a login window. And if your Aztech router’s IP address is incorrect, you will get a 404 error or an empty page.

Enter IP Address

To know your Aztech router’s IP address enter “ipconfig” command in the command prompt window if you are a window user.

Run command

 You will get the IP address of your Aztech router as the Default Gateway at the end of the list.

Commands on DOS prompt

And if you are a mobile user, then check your Aztech router’s connected Wi-Fi device advance properties to get your router’s IP Address.

Enter Credentials of your Router

After successfully entering your Aztech routers IP address, you will need to enter your Aztech router credentials (username and password of Aztech router). Enter your Aztech router credentials into the login window. If you enter the right credentials of your Aztech router, you will direct toward the control panel of your Aztech router. But if you enter wrong credentials of your Aztech router, you will get an error.

Sign in

In this case, open your Aztech router documentation and get your Aztech router’s credentials from there. You can also get your Aztech router credentials (username and password) from Google. But in case you have changed your Aztech router credentials, and you forgot them then you will need to reset your Aztech router to its default factory settings. To do this will need to press and hold your Aztech routers small button for 20-30 seconds. After that, your Aztech router will reboot. After successfully reboot you can enter your Aztech router default credentials.

Configure your Router Settings

Aztec Router

Next step is to configure your Aztech router settings as you want. You can block a specific type of your Aztech router’s users. You can block some specific sites to not open in you Aztech’s routers network and much more.

Recommended: Always first note down your Aztech router’s settings before changing them. Because sometimes after changing settings of your Aztech router you stuck. In this case, you will need to reset your Aztech router to its default factory settings. To avoid this issue first note down settings, so that in any problem revert your Aztech router changes.

 To secure your Aztech router always change credentials of your Aztech routers to the new one. Also, change your Aztech router default gateway, i.e. 192.168.1.1 to something new so that no one can try to configure your Aztech router settings. If someone does this, then you will have to reset your Aztech router to its default factory settings. And in this case, you will lose all of your Aztech router previous settings.

Troubleshoot:

Troubleshooting

If you are stuck and not getting any solution of your Aztech routers, then get help from your Aztech router’s manufacturers. You can also put your Aztech router issue in google to get help from experts.

Can I change my Aztech Router IP Address?

Yeah, its possible to change your Aztech router IP address using your router’s control panel. That said, i always recommend to change your Aztech router IP address. Because for example you have more then 200 employees in your company using your Aztech. All of them know that your Aztech router’s default IP address is 192.168.1.1. Any one of them can illegally access your Aztech router’s control panel. In this case he can do what he wants in your Aztech configuration area. To avoid scenario like this you should always change your Aztech router’s IP address in order to secure your router network from bad guys like hackers and such.

Difference Between Public IP Address and Private IP Address?

Every router like Aztech gets a public IP address to communicate with the whole digital world. It is the task of the Aztech router (in your case) to assign a private IP address to every device connected to it. Aztech router get the message from every device connected to it and pass it to the appropriate receiver. Also, Aztech router receive message from the internet and pass it to the appropriate connected device.

What is the Default Gateway?

What is Default Gateway

Default Gateway is the internal IP address of your Aztech wireless router. All the devices that are connected to the Aztech wireless router use internal IP address to communicate with the whole world. It is the Aztech routers gateway responsibility to router the messages to the appropriate places.

What is a proxy?

A proxy is used to hide your Aztech router identity from the world. Someone else send your Aztech router message to the correct place, also someone else give your Aztech router the appropriate message. Aztech router request to proxy and proxy will request to site. Also, proxy will get data from site and provide back to Aztech router. In the way your Aztech router remains hide from the other world. In market there are many proxy providers for your Aztech router i.e. Browser. In all communication your proxy will know all the information about your Aztech router.